banner

Doctor Answer

Gleihow New Materials Co., Ltd.

哥俩好

搜索
%{tishi_zhanwei}%
确认

资讯分类>

>

Common problems of transparent epoxy AB glue

1. When using transparent epoxy AB adhesive, whether to mix evenly according to the weight ratio of A: B component strictly?
A: The density of A and B components of transparent quick-setting epoxy adhesive is basically the same. When used, the volume of A and B components can be observed by naked eye, and there is no need for strict measurement. Mixing as long as the two glue liquid basic mixed together can be.
 
2. Why can I smell a bad smell after mixing? Is it harmful to human body? Whether it is harmful to human health by contact with hands or skin during operation.
A: When transparent quick setting epoxy adhesive is used, there will be a certain odor, which is the odor of polymercaptan curing agent. After mixing, the adhesive liquid reacts and exotherms to volatilize the odor, but this odor is low stimulation and low toxicity. It is best to maintain a good ventilated environment in the working place during the bonding operation. If the skin is accidentally stuck to the glue, it should be washed immediately with soapy water. Keep out of reach of children and keep out of entry.
 
3. How to remove epoxy glue without curing?
A: Uncured epoxy adhesives can be erased with anhydrous ethanol or acetone.
 
4, the use of transparent fast setting epoxy adhesive parts, how to want to disassemble the adhesive parts, with what way to disassemble.
A: After the transparent quick-setting epoxy adhesive is cured, the adhesive layer can be shed by soaking in acetone, tetrahydrofuran, ethyl acetate and other solvents for 24h.